ducatipaso.org http://www.ducatipaso.org/forum/ |
|
Poggipolini's NCR 1000NE http://www.ducatipaso.org/forum/viewtopic.php?f=8&t=189 |
Page 1 of 2 |
Author: | fasterdammit [ Thu Feb 10, 2005 5:00 am ] |
Post subject: | Poggipolini's NCR 1000NE |
Powered by the Multistrada's DS1000, at a cost of $45k USD, 30 will be made. Where do I sign up? |
Author: | mike [ Thu Feb 10, 2005 5:24 am ] |
Post subject: | |
man that seat/bar/peg ratio is pretty extreme very sexy! |
Author: | Skins [ Thu Feb 10, 2005 7:33 am ] |
Post subject: | |
fasterdammit, can you tell us who is Poggipolini and what does NCR stand for? |
Author: | fasterdammit [ Thu Feb 10, 2005 2:21 pm ] |
Post subject: | |
Author: | Skins [ Thu Feb 10, 2005 9:31 pm ] |
Post subject: | |
Author: | jcslocum [ Fri Feb 11, 2005 12:56 am ] |
Post subject: | |
Author: | Skins [ Fri Feb 11, 2005 1:59 am ] |
Post subject: | |
Author: | jcslocum [ Fri Feb 11, 2005 4:20 pm ] |
Post subject: | |
Author: | steele [ Sat Feb 12, 2005 12:22 am ] |
Post subject: | |
Author: | Skins [ Sat Feb 12, 2005 12:36 am ] |
Post subject: | |
Author: | Skins [ Sat Feb 12, 2005 7:48 pm ] |
Post subject: | |
Author: | steele [ Mon Feb 14, 2005 11:16 pm ] |
Post subject: | |
Author: | Skins [ Tue Feb 15, 2005 8:23 am ] |
Post subject: | |
My God, steele! I had no idea you were going that fast! Is she still basically standard apart from the fueling? I would also be interested to know how you shift gears. I strongly favour one-up-and-four-down, and have altered both my bikes to shift that way. I've written an article about shift patterns for the site, in fact, and am hoping to see it put up soon. |
Author: | steele [ Tue Feb 15, 2005 10:04 pm ] |
Post subject: | |
Well the motor is unopened its the NITROUS that makes the differance :thumbup: Seb has cut a screen from a Hayabusa into the blind paso screen it really looks good will post pics when bike back together This will enable us to get well tucked in and see were we are going .. only other mods will be Megaphones especially made for the paso as used by Maz kubicki on his worlds quickest paso in early 90s he went 10.32 in the 1/4 @ 136mph ![]() ![]() |
Author: | Skins [ Tue Feb 15, 2005 10:45 pm ] |
Post subject: | |
That's good testimony for the motor, what? How many revs do you take her up to? What gear are you pulling at the end of the quarter? If you're still using the standard gearchange, do you reckon you're changing quick enough? If you're making more than two changes, really quick changing could surely gain you a good piece of a second, eh? |
Page 1 of 2 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |