| ducatipaso.org http://www.ducatipaso.org/forum/ |
|
| Rear Swingarm for 907 needed! http://www.ducatipaso.org/forum/viewtopic.php?f=4&t=4667 |
Page 1 of 3 |
| Author: | JoKing [ Tue Mar 15, 2011 8:17 pm ] |
| Post subject: | Rear Swingarm for 907 needed! |
Hi, I just recognized, that i need a new swingarm for my 907  Has someone a spare? I think mine is rubbish... You can already see the steel of the bearing shining through.  This situation makes me very sad, and i hope someone can help me... Maybe we can make a deal, i have a new US-taillight (complete) and other rare parts. Or cash... Thanks, Johannes |
|
| Author: | Jaffa [ Wed Mar 16, 2011 12:36 am ] |
| Post subject: | Re: Rear Swingarm for 907 needed! |
I have a brand new one tucked away under my work bench. They are still available and I am sure I can get one for you here, but of course, there is the shipping cost. May make it unobtainable. 
|
|
| Author: | higgy [ Wed Mar 16, 2011 2:06 am ] |
| Post subject: | Re: Rear Swingarm for 907 needed! |
Dude,have it welded up.no big deal 
|
|
| Author: | JoKing [ Wed Mar 16, 2011 8:15 am ] |
| Post subject: | Re: Rear Swingarm for 907 needed! |
| Author: | Duc750 [ Wed Mar 16, 2011 8:57 am ] |
| Post subject: | Re: Rear Swingarm for 907 needed! |
That will weld up no problem at all |
|
| Author: | higgy [ Wed Mar 16, 2011 10:05 am ] |
| Post subject: | Re: Rear Swingarm for 907 needed! |
have the damaged one welded even if you opt for a new one  save those Paso's 
|
|
| Author: | JoKing [ Wed Mar 16, 2011 4:52 pm ] |
| Post subject: | Re: Rear Swingarm for 907 needed! |
I gave it to the workshop for welding today. And it is a really good workshop: http://mmkiel.de/ They say it it is NOT easy to weld it, because the wear is so high, that the bearings have been worn, so there are real holes. They have to remove the needle bearings, weld it from the outside and rework the hole for the bearings from the inside. It won`t be cheap, but i let the swingarm ther for repair... Next week i can get it. But if someone has a new one, i am still interested. |
|
| Author: | Jaffa [ Thu Mar 17, 2011 1:38 am ] |
| Post subject: | Re: Rear Swingarm for 907 needed! |
I will make some enquiries here and give you a total cost including shipping to Germany. I am happy to do this and send to you at cost....ie no cost to me. Cost will be in Aus $. Cheers. |
|
| Author: | JoKing [ Thu Mar 17, 2011 4:32 am ] |
| Post subject: | Re: Rear Swingarm for 907 needed! |
Great! Thanks! |
|
| Author: | JoKing [ Thu Mar 17, 2011 1:02 pm ] |
| Post subject: | Re: Rear Swingarm for 907 needed! |
Another question. In this picture, you can see steel shining through. swingarm.jpg [ 104.04 KiB | Viewed 6599 times ] In the parts catalogue, i can`t find a bushing around the needle bearings. SA-Bearing.jpg [ 34.71 KiB | Viewed 6599 times ] Is it part of the swingarm? Then i have to inform, the welding guys immediately... |
|
| Author: | JoKing [ Thu Mar 17, 2011 5:47 pm ] |
| Post subject: | Re: Rear Swingarm for 907 needed! |
Just met the welding guy. He is nearly ready. The steel you see is part of the bearing.
|
|
| Author: | Tamburinifan [ Thu Mar 17, 2011 8:58 pm ] |
| Post subject: | Re: Rear Swingarm for 907 needed! |
Do you know why this damage happened? |
|
| Author: | higgy [ Thu Mar 17, 2011 9:07 pm ] |
| Post subject: | Re: Rear Swingarm for 907 needed! |
Looks like chain damage 
|
|
| Author: | Jaffa [ Fri Mar 18, 2011 1:48 am ] |
| Post subject: | Re: Rear Swingarm for 907 needed! |
| Author: | Jaffa [ Fri Mar 18, 2011 2:04 am ] |
| Post subject: | Re: Rear Swingarm for 907 needed! |
| Page 1 of 3 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|