ducatipaso.org http://www.ducatipaso.org/forum/ |
|
Could Someone post a picture of their fork leg please. http://www.ducatipaso.org/forum/viewtopic.php?f=3&t=3879 |
Page 1 of 1 |
Author: | englishstiv [ Mon Jan 25, 2010 11:24 pm ] |
Post subject: | Could Someone post a picture of their fork leg please. |
Is it possible someone could post a couple of photo's of the damper unit on the fork leg as I am now going to get mine repaired and rebuilt by a mate that I have hooked back up with who fabricated a load parts for my old Rickman Triumph Cafe Racer ( which I should never of sold ![]() Thank you in anticipation................................................ ![]() |
Author: | paso750 [ Tue Jan 26, 2010 9:45 am ] |
Post subject: | Re: Could Someone post a picture of their fork leg please. |
there you go. Here`re some of my spare 750 fork but the adjuster should be the same for all. Depth of the recess on the bottomside of the knob is 4mm. (normally there`s a black rubber "tube" over the knob. That`s missing on most Pasos I`ve seen. That should probably just prevent that water enters and the circlips starts to rust) |
Author: | englishstiv [ Tue Jan 26, 2010 12:40 pm ] |
Post subject: | Re: Could Someone post a picture of their fork leg please. |
A Big thank you to you for this ![]() ![]() Also can I thank pasolloyd ![]() ![]() ![]() ![]() |
Author: | pasolloyd [ Wed Jan 27, 2010 4:54 am ] |
Post subject: | Re: Could Someone post a picture of their fork leg please. |
Here is one of the adjuster with the boot FYI... |
Author: | pasolloyd [ Wed Jan 27, 2010 4:57 am ] |
Post subject: | Re: Could Someone post a picture of their fork leg please. |
Lets try that again: Here is one of the adjuster with the boot FYI... |
Author: | pasolloyd [ Wed Jan 27, 2010 5:02 am ] |
Post subject: | Re: Could Someone post a picture of their fork leg please. |
ONE LAST TIME! |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |