| ducatipaso.org http://www.ducatipaso.org/forum/ |
|
| 907 forks http://www.ducatipaso.org/forum/viewtopic.php?f=3&t=3726 |
Page 1 of 1 |
| Author: | lofty 36 [ Fri Nov 13, 2009 7:14 am ] |
| Post subject: | 907 forks |
Hi Guys I have been lucky to pickup a 907 with damaged forks I have a set of 906 folks that i was hoping to fit to complete the bike,I am aware that the 907 forks are 10 longer than the 906 folks I believe this is to accomodate the larger 17" wheels just wondering if there is any issues with using the 906 folks. Thanks for your help Lofty |
|
| Author: | Tamburinifan [ Fri Nov 13, 2009 9:07 pm ] |
| Post subject: | Re: 907 forks |
Since the 906 uses smaller discs & different calipers, I think that is a problem w 906 forks on a 907. |
|
| Author: | paso750 [ Fri Nov 13, 2009 10:18 pm ] |
| Post subject: | Re: 907 forks |
for that there are adapters. Are the fork diameters the same ? |
|
| Author: | ducinthebay [ Sat Nov 14, 2009 5:10 am ] |
| Post subject: | Re: 907 forks |
Lofty, I am in need of one good 907 stancion tube, and have some 906/750 fork tube to trade. Are your forks straight and not pitted? For some strange reason, One of my stancion tubes has lots of rust spots, and the other one has none. Maybe the way it was stored once. Cheers, |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|