ducatipaso.org http://www.ducatipaso.org/forum/ |
|
Clutch master cylinder http://www.ducatipaso.org/forum/viewtopic.php?f=2&t=7566 |
Page 1 of 1 |
Author: | ducatipete [ Thu Nov 10, 2016 9:20 am ] |
Post subject: | Clutch master cylinder |
Need to over haul my master cylinder, assume its a Brembo, what diameter is the bore/any part numbers? many thanks Pete |
Author: | Derek [ Thu Nov 10, 2016 9:41 am ] |
Post subject: | Re: Clutch master cylinder |
I'm pretty sure you need a PS13 seal kit but it may be a PS12. Both are available from Gutsibits |
Author: | paso750 [ Thu Nov 10, 2016 4:45 pm ] |
Post subject: | Re: Clutch master cylinder |
have a look at the bottom side of the pump. There should be a number stamped on the housing. |
Author: | ducatipete [ Fri Nov 11, 2016 8:30 pm ] |
Post subject: | Re: Clutch master cylinder |
thanks, will have a look weekend... |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |