| ducatipaso.org http://www.ducatipaso.org/forum/ |
|
| Help finding new Starter Sprag http://www.ducatipaso.org/forum/viewtopic.php?f=2&t=4992 |
Page 1 of 1 |
| Author: | Harry [ Mon Aug 08, 2011 8:34 am ] |
| Post subject: | Help finding new Starter Sprag |
So yeh where do i start looking for this part?. I did read on another web-site that the Sprag from a KTM LC4 Motor will fit ( 640cc ?) but my local helpful Ducati / KTM Parts supplier is as about as much use as an Ash Tray on a Motorbike when i contacted him. So yeh help would be much appreciated and any thanks in advance. |
|
| Author: | Duc906 [ Mon Aug 08, 2011 10:13 am ] |
| Post subject: | Re: Help finding new Starter Sprag |
G'day Harry Have you had the engine apart to determine the condition of the sprag clutch? You may want to have a read of these web sites. You might only have to replace the spring at a fraction of the cost of a new sprag. http://www.perthstreetbikes.com/forum/f ... tch-85481/ http://www.mad-ducati.com/Technical/Sta ... lutch.html http://www.mad-ducati.com/Technical/Eng ... over2.html I've had to do it to mine, just remember to wrap tape around the cams as soon as you get the sprag out. 
|
|
| Author: | paso750 [ Mon Aug 08, 2011 11:09 am ] |
| Post subject: | Re: Help finding new Starter Sprag |
viewtopic.php?f=1&t=4189 maybe this helps, too. G. |
|
| Author: | Mc tool [ Tue Aug 09, 2011 5:19 am ] |
| Post subject: | Re: Help finding new Starter Sprag |
Bevel Heaven also sell a sprag that they claim ( and Im sure they are right ) will fit a paso among others . I have had excelent service from them in the past 
|
|
| Author: | Jaffa [ Tue Aug 09, 2011 7:06 am ] |
| Post subject: | Re: Help finding new Starter Sprag |
I replaced the sprag in my 907 with a 900 monster version....a couple of years ago now, but still working well. Try Ian Gowanloch, or Gowanloch Ducati or Road & Race. There are plenty of places here in Oz that can help you out. If you get in quick enough though, the $ is still over parity so it may be worthwhile getting one from Bevel Heaven. There are dozens of sites around that will have these. Cheers. |
|
| Author: | romus [ Wed Aug 10, 2011 6:33 am ] |
| Post subject: | Re: Help finding new Starter Sprag |
| Author: | romus [ Wed Sep 07, 2011 9:21 pm ] |
| Post subject: | Re: Help finding new Starter Sprag |
| Author: | Harry [ Thu Sep 08, 2011 7:35 am ] |
| Post subject: | Re: Help finding new Starter Sprag |
Thanks for the advice everybody. I am just waiting for the Courier to drop my new Sprag off which i ended up getting from Bevel Heaven. Once it arrives it will be time to chill the Beers, break out the Spanners and start throwin them around. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|