| ducatipaso.org http://www.ducatipaso.org/forum/ |
|
| paso newbie http://www.ducatipaso.org/forum/viewtopic.php?f=2&t=4784 |
Page 1 of 1 |
| Author: | Jeff T [ Sat Apr 30, 2011 5:47 am ] | ||
| Post subject: | paso newbie | ||
Hi all, my name is jeff and i hail from Adelaide Australia. have recently purchased this bike and am loving it. I have workshop manual but no owners manual so am looking forward to gaining some knowledge on this bike. Basics like checking oils and coolants ect. cheers all for now jeff Mods include, Staintune exhaust, twin dellorto's with malossi manifolds. Ohlins shock, twin pull tommaseli throttle and the heads have been flowed.
|
|||
| Author: | paso750 [ Sat Apr 30, 2011 7:25 am ] |
| Post subject: | Re: paso newbie |
Jeff, nice bike. You`ll find lots of info in the 906 and P750 FAQs and the manuals here: viewtopic.php?f=1&t=1551 G. |
|
| Author: | Jeff T [ Sun May 01, 2011 4:16 am ] |
| Post subject: | Re: paso newbie |
cheers mate for the link. I have been tinkering and cleaning all day and now it is raining  thanks again. Jeff |
|
| Author: | paso750 [ Sun May 01, 2011 8:44 am ] |
| Post subject: | Re: paso newbie |
I`m wondering about the Ohlins shock. If it is an aftermarket or from an early P750. If the later it may be a bit soft as the 906 is heavier. But that may be a good thing as Duc shocks used to be rather hard. |
|
| Author: | Jeff T [ Sun May 01, 2011 11:17 pm ] |
| Post subject: | Re: paso newbie |
Hi P750, not sure about the shock as it was on the bike allready. I believe the original owner may have replaced it. The bike rides well and does not seem to harsh or sloppy. This will be the first sports oriented bike i have owned so am not to experienced on this type of bike. My previous bikes have all been Enduro/ road trail bikes with some smaller bikes, CB and LTD being my only road bikes. This bike was part of a will which was left to my brothers wife and they did not know what they were going to do with it, so I bought it because I had sold the CB some months back and something told me to buy it. Got it for a good price and the bike has been very well looked after its whole life. I was considering an XTZ 1200. (multistrada to dear  but this bike sounds magnificent and is lovely to ride so i will hang onto it and ride it often and hopefully I can grow to fully appreciate and enjoy this bike as you guys all do.cheers for now Jeff Ps odo reads 51000km . |
|
| Author: | micklm [ Tue May 03, 2011 3:17 pm ] |
| Post subject: | Re: paso newbie |
Hi All, I'm running a P750 Ohlins shock on my 906, but had the same concern as Gerhard. I had the shock reworked by an Ohlins guy anyway since it was second hand so told him what I was planning with it. Gave him the bike weight difference etc and he re-sprung it (and maybe also re-valved it?) for the 906. I don't know the spring he used off the top of my head but it was a different one (I got the original back if anyone with a 750 needs a spare). Another 906 owner on the forum has done a similar thing (that's where I got the idea). I've done about 5000kms since, including some reasonably spirited riding in the Pyrenees (given my lack of riding talent!). Also on some fairly rough roads - no problems and a vast improvement (especially when with the pillion also on the bike). Welcome to the forum by the way mate - nice looking example! I'd be interested to see how the remote preload adjustor is mounted on your bike by the way - I had the devils own time getting it to mount cleanly on the 906 frame......but then I think there is three or four versions of the various mounting brackets between 906/750/907 and MZ/Ohlins! Cheers, Mick |
|
| Author: | Tamburinifan [ Wed May 04, 2011 11:01 am ] |
| Post subject: | Re: paso newbie |
| Author: | micklm [ Sat May 07, 2011 7:07 am ] |
| Post subject: | Re: paso newbie |
Hi Gert, I'll have a look and see if I can find anything - the last guy to do the same did post something about the spring but I can recall.... The shock only has remote preload, not a remote reservoir like the MZ. It is adjustable otherwise the same as the MZ. But I suppose the big difference (aside from the vavling etc) is the diameter - the Ohlins shock has much bigger diameter piston and body. Cheers, Mick |
|
| Author: | micklm [ Wed Nov 23, 2011 9:29 pm ] |
| Post subject: | Ohlins spring part number for 906 |
| Author: | Tamburinifan [ Wed Dec 07, 2011 1:11 pm ] |
| Post subject: | Re: paso newbie |
Thx! 
|
|
| Author: | persempre907 [ Thu Dec 08, 2011 10:10 am ] |
| Post subject: | Re: paso newbie |
The Ohlins shock is surely better than the Marzocchi unit. However, compliments. Beautiful bike, same colour of my first beloved 906  (i'm getting old and melancholy)  Ciao 
|
|
| Author: | Tamburinifan [ Wed Dec 14, 2011 8:35 pm ] |
| Post subject: | Re: paso newbie |
| Author: | Mc tool [ Thu Dec 15, 2011 5:53 am ] |
| Post subject: | Re: paso newbie |
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|