| ducatipaso.org http://www.ducatipaso.org/forum/ |
|
| 906 vs 907 http://www.ducatipaso.org/forum/viewtopic.php?f=2&t=172 |
Page 1 of 2 |
| Author: | lleach [ Wed Jan 26, 2005 5:28 am ] |
| Post subject: | 906 vs 907 |
What are the differences? Is there a message that already compares the two? Les Leach |
|
| Author: | mike [ Wed Jan 26, 2005 8:04 pm ] |
| Post subject: | |
| Author: | steele [ Sun Feb 06, 2005 12:55 pm ] |
| Post subject: | |
| Author: | Finnpaso [ Tue Feb 15, 2005 8:11 am ] |
| Post subject: | |
Sorry Steele, I have LIGHT 750 Paso and VERY GOOD 907IE, but never wanted 906, because it have same "problems", as 750 Paso plus heavy weight(and awful front brakes compared to that weight) Btw, i have changed many things in my 750 Paso electrics and thrown Weber away to get rid of most "problems"...... Antti, who is thinking, what shall be next to collection... 2000 ST2 with mods, or newer ST4S ???? Any advises? all welcome.... |
|
| Author: | steele [ Tue Feb 15, 2005 9:54 pm ] |
| Post subject: | |
Well have to disagree there my 906 DOES NOT suffer from the problems of the 750 and i have to say ..i think a lot of you are taken in by the crap that some journalists wrote about the 906 when it was new .... This year i really belive mine will crack 160mph with my friend SEB on board at 200mph .org speed trial at RAF woodbridge ...Lets see a 907 that can do that :thumbup: :neener: |
|
| Author: | qldman36 [ Tue Feb 15, 2005 10:19 pm ] |
| Post subject: | |
And just how much of your 906 is original as built? You don't think with proportional mods,a 907 couldn't cut it? |
|
| Author: | steele [ Wed Feb 16, 2005 9:07 pm ] |
| Post subject: | |
| Author: | steele [ Wed Feb 16, 2005 9:10 pm ] |
| Post subject: | |
| Author: | qldman36 [ Wed Feb 16, 2005 9:52 pm ] |
| Post subject: | |
| Author: | Finnpaso [ Thu Feb 17, 2005 5:22 am ] |
| Post subject: | |
| Author: | mike [ Thu Feb 17, 2005 4:30 pm ] |
| Post subject: | |
| Author: | steele [ Thu Feb 17, 2005 7:35 pm ] |
| Post subject: | |
| Author: | steele [ Thu Feb 17, 2005 7:37 pm ] |
| Post subject: | |
| Author: | qldman36 [ Thu Feb 17, 2005 8:28 pm ] |
| Post subject: | |
| Author: | steele [ Thu Feb 17, 2005 9:57 pm ] |
| Post subject: | |
| Page 1 of 2 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|