| ducatipaso.org http://www.ducatipaso.org/forum/ |
|
| 750 Sport Oil screener http://www.ducatipaso.org/forum/viewtopic.php?f=13&t=7901 |
Page 1 of 1 |
| Author: | Obito [ Tue Apr 17, 2018 8:48 am ] | ||
| Post subject: | 750 Sport Oil screener | ||
Hello everybody, I was making an oil change to my 750S and wanted to clean the oil screener/strainer. I ran into a problem where the strainer part got stuck inside the engine and only the bolt came out. Is there any hints how to get it out?
|
|||
| Author: | paso750 [ Wed Apr 18, 2018 7:45 am ] |
| Post subject: | Re: 750 Sport Oil screener |
Ups. It happens sometimes and it happened to a few guys on the forum. I guess the only way to get it out is with a lot of patience and long needle nose pliers. |
|
| Author: | Derek [ Wed Apr 18, 2018 8:31 am ] |
| Post subject: | Re: 750 Sport Oil screener |
Or maybe a pair of artery forceps |
|
| Author: | Obito [ Fri Apr 20, 2018 6:16 am ] |
| Post subject: | Re: 750 Sport Oil screener |
Thank you for the hints. I have to try this... |
|
| Author: | Derek [ Fri Apr 20, 2018 8:23 am ] |
| Post subject: | Re: 750 Sport Oil screener |
Another option: |
|
| Author: | paso750 [ Fri Apr 20, 2018 9:40 am ] |
| Post subject: | Re: 750 Sport Oil screener |
those are good but not very strong. Since the plastic part he has to fish out has almost the same diameter as the hole it needs to be pulled through it will slip from that grabbing tool every time. Another thing to try with long needle nose pliers is stick them into the tube carefully and open the pliers while pulling out. Getting it this way might make it easier pulling it out than grabbing its edge. If the pliers are too big one could also unbend a coat hanger, shape a U, bend the tips outwards and use it the same way. |
|
| Author: | Derek [ Sat Apr 21, 2018 8:02 am ] |
| Post subject: | Re: 750 Sport Oil screener |
| Author: | Obito [ Tue Apr 24, 2018 8:50 am ] |
| Post subject: | Re: 750 Sport Oil screener |
Thanks a lot for ideas!  Got it out
|
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|