When I fitted a dynojet kit to my carbs , I took note of how many turns it took to seat the screws which was 3.5 .
The instructions then state 3.5 turns from fully seated, hope that helps
| ducatipaso.org http://www.ducatipaso.org/forum/ |
|
| Mikuni carb fuel screw setting http://www.ducatipaso.org/forum/viewtopic.php?f=13&t=4246 |
Page 1 of 1 |
| Author: | Mustang505 [ Wed Aug 18, 2010 10:18 pm ] |
| Post subject: | Mikuni carb fuel screw setting |
Hi I have done a search here and on Paso forum to try find the stardard Mikuni carb fuel screw setting. i found one statement of 3.5 turns out. is that right? can anyone confirm? thanks |
|
| Author: | Foxtee [ Wed Aug 18, 2010 11:35 pm ] |
| Post subject: | Re: Mikuni carb fuel screw setting |
When I fitted a dynojet kit to my carbs , I took note of how many turns it took to seat the screws which was 3.5 . The instructions then state 3.5 turns from fully seated, hope that helps
|
|
| Author: | Tamburinifan [ Thu Aug 19, 2010 12:11 am ] |
| Post subject: | Re: Mikuni carb fuel screw setting |
| Author: | higgy [ Thu Aug 19, 2010 1:38 am ] |
| Post subject: | Re: Mikuni carb fuel screw setting |
The Sudco Mikuni Tuning manual is the defacto bible for any Mikuni carb and you can get a copy at this Url 13.60 with s/h included,cheap by any standard
|
|
| Author: | Mustang505 [ Thu Aug 19, 2010 9:55 pm ] |
| Post subject: | Re: Mikuni carb fuel screw setting |
thanks Guys |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|