| ducatipaso.org http://www.ducatipaso.org/forum/ |
|
| Yoshimura muffler mounting http://www.ducatipaso.org/forum/viewtopic.php?f=1&t=7219 |
Page 1 of 1 |
| Author: | Charlie Mullendore [ Sat Jul 25, 2015 8:34 pm ] |
| Post subject: | Yoshimura muffler mounting |
My project Paso has Yoshimura mufflers on it, but they do not appear to be mounted correctly. At some point a screw head on them has rubbed up against the swingarm leaving a gouge.  The mounting bracket is currently on the inside of the passenger peg bracket/muffler hanger, should it be on the outside instead for more clearance?
|
|
| Author: | Fraser [ Sun Jul 26, 2015 10:13 pm ] |
| Post subject: | Re: Yoshimura muffler mounting |
Charlie, the muffler bracket normally fits between the foot peg and the frame hanger. You can always pack the muffler bracket out a bit with some washers to give some extract clearance from the swing arm. Just checked your web site, nice looking Convert! Had mine out on the weekend. Cheers, Fraser. |
|
| Author: | wcmiller2002 [ Mon Jul 27, 2015 12:28 am ] |
| Post subject: | Re: Yoshimura muffler mounting |
Same thing happened on my Paso. Agree with Fraser. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|