| ducatipaso.org http://www.ducatipaso.org/forum/ |
|
| source for piston rings or piston set http://www.ducatipaso.org/forum/viewtopic.php?f=1&t=4785 |
Page 1 of 1 |
| Author: | 0xff [ Sun May 01, 2011 6:41 am ] |
| Post subject: | source for piston rings or piston set |
does anybody know a good source for piston rings or piston sets in europe which are decently priced? also for the top conrod bushing? i've seen a couple of cars that have 88mm pistons but the oil ring is too thick (5mm, 2mm more than the original paso 750) and i can't rectify it as the other top ones. |
|
| Author: | paso750 [ Sun May 01, 2011 8:31 am ] |
| Post subject: | Re: source for piston rings or piston set |
if you want new pistons it´ll be hard as they were discontinued. Maybe some old Ducati dealer still has some in stock. Otherwise there´re used ones on ebay and Ferracci is selling 90mm big bore pistons and 88mm pistons as conversion of 600 Monsters. Don´t know if the last will also be good for a Paso though. For piston rings and bushings check Stein Dinse in Germany. http://www.sd-tec.de/catalog/product_in ... 3d892d42e4 http://www.sd-tec.de/catalog/product_in ... 3d892d42e4 G. |
|
| Author: | 0xff [ Sun May 01, 2011 9:12 am ] |
| Post subject: | Re: source for piston rings or piston set |
thanks for links! the piston rings look very dear if they charge for single piston. if i have no choice i'll probable get a set of vw 88mm rings and rectify them to right size. |
|
| Author: | BARONROJO [ Sun May 01, 2011 10:43 am ] |
| Post subject: | Re: source for piston rings or piston set |
I got my piston rings exactly at the same price (170€ for both cylinders) 4 months ago in the Ducati dealer. They are coomen parts, expensive though, |
|
| Author: | higgy [ Sun May 01, 2011 11:44 am ] |
| Post subject: | Re: source for piston rings or piston set |
Complete set piston and rings 75usd about 50eu plus shipping |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|