| ducatipaso.org http://www.ducatipaso.org/forum/ |
|
| Workshop manual for PASO 750 with DIGIPLEX (Advance Timings) http://www.ducatipaso.org/forum/viewtopic.php?f=1&t=4353 |
Page 1 of 1 |
| Author: | angelix [ Fri Oct 08, 2010 8:56 am ] |
| Post subject: | Workshop manual for PASO 750 with DIGIPLEX (Advance Timings) |
I have been looking for the Paso 750 DIgiplex advance diagrams, but all the versions of the workshoop I find refer only to the KoKusan Modules. You can get the Digiplex curves on the 906 manual, but I wanted to see what sort of timing curves were used on the 750. I remember the Digiplex box had a different number on it, they were interchangeable (in fact my P750 had a 906 box on it) but i have the feeling the advance timing was quite different. |
|
| Author: | wellerjt [ Thu Oct 14, 2010 12:25 am ] |
| Post subject: | Re: Workshop manual for PASO 750 with DIGIPLEX (Advance Timings) |
1987 Paso 750. I have to turn off the petcock when I park the bike or gas leak out the overflow. Does this mean the carb float is stuck? Is there a cure or does the carb need overhauled? Jeff |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|