ducatipaso.org http://www.ducatipaso.org/forum/ |
|
1988 Paso with Marzocchi Rear Shock http://www.ducatipaso.org/forum/viewtopic.php?f=1&t=3072 |
Page 1 of 1 |
Author: | orbit398 [ Fri Feb 20, 2009 5:01 pm ] |
Post subject: | 1988 Paso with Marzocchi Rear Shock |
I have a leaky Marzocchi rear shock on my 1988 Paso. I have it apart to rebuild and it has a weird seal in it. I can't find a replacement and search the net with no luck. What are my options. thanks |
Author: | englishstiv [ Fri Feb 20, 2009 6:12 pm ] |
Post subject: | Re: 1988 Paso with Marzocchi Rear Shock |
I am pretty sure if you do a search on this site you should find a couple threads naming manufacturers stateside that do full rebuilds I can't see from your profile where in the world you are located, there are also a few threads that I believe offer a breakdown of the parts and their numbers and tools used etc. |
Author: | Kurt [ Fri Feb 20, 2009 6:23 pm ] |
Post subject: | Re: 1988 Paso with Marzocchi Rear Shock |
Where are you? I have a rebuild kit from Marzocchi that I bought from another forum member for my 907, but I will not be using it. Also, I don't know if the 750 and 907 use the same shock (but I'm sure someone here knows). Here's what it looks like: Anyway, I have $55 USD invested in the kit if anybody can use it at that price, plus shipping from US zipcode 02474 (Boston). Also, GMD recommended replacing rather than rebuilding my stock shock, so if anybody wants my old shock plus the kit, you can have it all for $55 plus shipping. As y'all may recall, the battery (thanks to previous owner) had breathed death upon the bottom of the shock, eating away the knob on the bottom and notching the spring. Could be that someone could use it for parts or rebuild it, but I went for a new Penske. If no one on paso.org can use it, next stop, eBay! |
Author: | Finnpaso [ Fri Feb 20, 2009 7:10 pm ] |
Post subject: | Re: 1988 Paso with Marzocchi Rear Shock |
Its big PITTY, that guys DONT put LOCATION(!!!) to they details, that its easy to think about shipping of parts !!!!! I have talked this some time ago here in this site... ![]() ![]() Btw, i am still searching used Marzhocci Duo Remoto 38 unit from 91* 907IE, from where i can get that whole lower part adjusting knob system to my unit. 750 Paso and 906 early units were different, than in 907..... Maybe later 906 had same, as in 907? ![]() |
Author: | persempre907 [ Fri Feb 20, 2009 8:35 pm ] |
Post subject: | Re: 1988 Paso with Marzocchi Rear Shock |
That Marzocchi overhauling kit shares the same number both for the 906 and the 907. I also have such kit. Ciao |
Author: | Kurt [ Fri Feb 20, 2009 10:57 pm ] |
Post subject: | Re: 1988 Paso with Marzocchi Rear Shock |
As usual, if I write something ignorant, I am corrected within minutes! This site is great, I don't have to think or remember anything, you guys will set me straight -- thank you! ![]() |
Author: | Finnpaso [ Sat Feb 21, 2009 8:01 am ] |
Post subject: | Re: 1988 Paso with Marzocchi Rear Shock |
Author: | higgy [ Sat Feb 21, 2009 3:00 pm ] |
Post subject: | Re: 1988 Paso with Marzocchi Rear Shock |
Antti, I have a shock from a late(6/89) 906 sold as a 90. I will look into the details for you today to see if it suits your needs. higgy |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |