I was lucky to find such from local rubber store!!!(for few €'s / 6 pieces)............ I bought such OEMs about 6 years ago from Ducati dealer and price was something AMAZING (HIGH!!!)....
| ducatipaso.org http://www.ducatipaso.org/forum/ |
|
| Paso Instrument Cluster Rubber Mounts http://www.ducatipaso.org/forum/viewtopic.php?f=1&t=2962 |
Page 1 of 1 |
| Author: | whitepaso [ Fri Dec 12, 2008 5:49 pm ] |
| Post subject: | Paso Instrument Cluster Rubber Mounts |
I recently had to replace the flexible rubber supports for my 750 Paso instrument cluster and I came across this source. No affiliation here, just another parts source for all those little things. Prices are reasonable and customer service is good. Cool website too. You'll need to buy two pairs because we need three mounts. They fit perfectly. I don't know if these are available from the Ducati dealers but if I had to guess I'd say "no". Hope you find this helpful. Tom |
|
| Author: | Finnpaso [ Fri Dec 12, 2008 7:59 pm ] |
| Post subject: | Re: Paso Instrument Cluster Rubber Mounts |
I was lucky to find such from local rubber store!!!(for few €'s / 6 pieces)............ I bought such OEMs about 6 years ago from Ducati dealer and price was something AMAZING (HIGH!!!)....
|
|
| Author: | persempre907 [ Fri Dec 12, 2008 9:55 pm ] |
| Post subject: | Re: Paso Instrument Cluster Rubber Mounts |
The Paso's dashboard has 3 of those rubber supports. Really, on my black 907 I glued (loctite) a broken support... Ciao |
|
| Author: | whitepaso [ Sat Dec 13, 2008 1:07 am ] |
| Post subject: | Re: Paso Instrument Cluster Rubber Mounts |
One of mine was broken so I glued it together also which worked fine until I found these replacements  . Money comes in my pocket.....money goes out my pocket!Here is another source for all you folks down under: |
|
| Author: | whitepaso [ Sat Dec 13, 2008 1:11 am ] |
| Post subject: | Re: Paso Instrument Cluster Rubber Mounts |
Sorry - this link is more direct: |
|
| Author: | johanv [ Wed Dec 17, 2008 10:44 am ] |
| Post subject: | Re: Paso Instrument Cluster Rubber Mounts |
I replaced them by M6 mount, because all the original M5 mounts break. |
|
| Author: | Desmo_Demon [ Wed Dec 17, 2008 1:12 pm ] |
| Post subject: | Re: Paso Instrument Cluster Rubber Mounts |
I bought a few from the dealer, a year or two ago, and they were around $15 each. I found that McMaster-Carr offers them for about a $1 or so, each, but you will need to trim a little off of one stud, as they are a little long. If you do a search, you'll probably be able to find the thread where I mention them and give the link to McMaster-Carr's website. |
|
| Author: | jcslocum [ Wed Dec 17, 2008 11:52 pm ] |
| Post subject: | Re: Paso Instrument Cluster Rubber Mounts |
If you find the thread, put a link in the FAQ. |
|
| Author: | Desmo_Demon [ Thu Dec 18, 2008 3:59 pm ] |
| Post subject: | Re: Paso Instrument Cluster Rubber Mounts |
| Author: | whitepaso [ Thu Dec 18, 2008 6:08 pm ] |
| Post subject: | Re: Paso Instrument Cluster Rubber Mounts |
Guess I didn't do my research very well on this.  If there is a next time, I'll know better!
|
|
| Author: | desmodave [ Sat Jan 10, 2009 10:33 am ] |
| Post subject: | Re: Paso Instrument Cluster Rubber Mounts |
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|