- custom footpeg mounting brackets, footpegs and pedals
- Tecnomagnesio wheels (aftermarket)
- floating front brake discs (original size 280mm, probably Brembo) on adapters
- original rear brake disc on adapter
- black 4 piston Brembo calipers on the front (from Ducati 851 I think)
- caliper adapters
- steel braided brake lines and clutch line
- seat has new cover (original isn`t stitched)
- passenger grab handle was cut off
- Conti 2in1 exhaust
- vented clutch cover
- carbs & air filters
- oil check window from newer Duc types (probably that engine cover was changed)
- oil cooler lines were wrapped with tape (probably they have cracks)
- rubber tube on brake lever
- front sprocket cover
- numerous bolts could be stainless steels as they look quite shiny
- the hole of the steering halves was machined bigger as otherwise it`s not possible that the fork tubes stick out on top
- Euro talllight
(are the oil coolers original ? the top and bottom part looks a little bit different compared to my own.)
G.
