anyone happen to know that ?
(These are the 3 spoke rims as on the 750 Montjuich)
May sound off-topic but I`m not the only one having a pair waiting to be put on the Paso
G.
| ducatipaso.org http://www.ducatipaso.org/forum/ |
|
| correct torque for bolts on Marvic rims ? http://www.ducatipaso.org/forum/viewtopic.php?f=1&t=2214 |
Page 1 of 1 |
| Author: | paso750 [ Wed Jan 02, 2008 8:34 pm ] |
| Post subject: | correct torque for bolts on Marvic rims ? |
anyone happen to know that ? (These are the 3 spoke rims as on the 750 Montjuich) May sound off-topic but I`m not the only one having a pair waiting to be put on the Paso G. |
|
| Author: | persempre907 [ Wed Jan 02, 2008 8:50 pm ] |
| Post subject: | Re: correct torque for bolts on Marvic rims ? |
| Author: | Tamburinifan [ Thu Jan 03, 2008 2:51 am ] |
| Post subject: | Re: correct torque for bolts on Marvic rims ? |
F1 & 750 Sport manuals availiable here: http://www.duc.nu/manuals/ |
|
| Author: | paso750 [ Thu Jan 03, 2008 10:50 am ] |
| Post subject: | Re: correct torque for bolts on Marvic rims ? |
thanks, but I`m sure that info is not in the F1 workshop manual. Btw numerous manuals for download on that side are or were downloadeble for free on the Ducati homepage (or somewhere else on the web). G. |
|
| Author: | Finnpaso [ Thu Jan 03, 2008 1:28 pm ] |
| Post subject: | Re: correct torque for bolts on Marvic rims ? |
Remembering, that those Marvic rims are 16" and also hard to find anymore tires to those. I had possibility some years ago to buy such pair ,but i realized, that tire problem and i give up that modification... Cant remember anymore details, sorry. 
|
|
| Author: | jcslocum [ Fri Jan 04, 2008 6:31 pm ] |
| Post subject: | Re: correct torque for bolts on Marvic rims ? |
Inspect the VERY close for cracks. Very close.... I think I know someone who will know. I will ask. |
|
| Author: | jcslocum [ Fri Jan 04, 2008 10:35 pm ] |
| Post subject: | Re: correct torque for bolts on Marvic rims ? |
Hi Jon, They get loose before they crack. The nuts are only 11 ftlbs. If you over torque them they break the mag spoke. Have saved a few with industril alm adhesive. you have to disassemble rim from spokes and get the adhesive totaly in the joint assemble and true before the glue sets up. If you run those wheels keep a close eye on them. If the alm to mag joint wears a little they are hard to repair after that. |
|
| Author: | paso750 [ Sat Jan 05, 2008 10:24 am ] |
| Post subject: | Re: correct torque for bolts on Marvic rims ? |
so 14.92 NM. Thanks very much for investigating, Jon ! My Marvic rims are new, but I will definetely keep an eye on them. G. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|