nickapaso, let us know, how much those air scoops(CF) coast there.
| ducatipaso.org http://www.ducatipaso.org/forum/ |
|
| reproduction body panels in fiberglass or carbon fiber! http://www.ducatipaso.org/forum/viewtopic.php?f=1&t=2159 |
Page 1 of 1 |
| Author: | nickapaso [ Mon Dec 03, 2007 9:46 am ] |
| Post subject: | reproduction body panels in fiberglass or carbon fiber! |
Has anybody ever bought reproduction body parts for their paso. I found this place that makes them at pretty reasonable prices and was curious as to whether anyone has bought any similar ones and was ahppy with the quality. I spoke to the man who makes them and he also says he can make them out of carbon fiber which would be cool. He said that it would cost five times the regular fiberglass price and ring in at about $4000. But he also sells just the scoops for the oil coolers. I am going to get the piece above the licence plate and the scoops for mine due to a limited budget. I just thought I'd share. Here is the link to his website though if anyone cares to check it out. http://www.airtech-streamlining.com/duc ... 986-87.htm |
|
| Author: | paso750 [ Mon Dec 03, 2007 10:59 am ] |
| Post subject: | Re: reproduction body panels in fiberglass or carbon fiber! |
Seems you`ve been lucky. Lots of people complained that they had tried to contact air-tech but never received a reply. Further problem seems to be that the parts (sometimes) aren`t a perfect fit and that ie the mounting holes need to be modified. G. |
|
| Author: | jcslocum [ Mon Dec 03, 2007 1:09 pm ] |
| Post subject: | Re: reproduction body panels in fiberglass or carbon fiber! |
I was told that they don't come with the mounting holes drilled and that they are considered in "rough" condition. Some trimmming and a trip to the body shop may be required. I have no FHE with these parts but this is what I was told when looking into getting some Airtech pieces. Ebay is a better solution for bodywork. |
|
| Author: | Finnpaso [ Mon Dec 03, 2007 3:48 pm ] |
| Post subject: | Re: reproduction body panels in fiberglass or carbon fiber! |
nickapaso, let us know, how much those air scoops(CF) coast there.
|
|
| Author: | dave906 [ Thu Dec 13, 2007 12:44 pm ] |
| Post subject: | Re: reproduction body panels in fiberglass or carbon fiber! |
Gowanlochs in Sydney, Australia used to have aftermarket unpainted fibreglass Paso body work. This was about 10+ years ago last I saw, but they may still be able to get them. http://www.ducati-gowanloch.com/ 702 Canterbury Road Belmore Sydney NSW 2192 Australia Email: gowanloch@ozemail.com.au Phone: +61 (0)2 9750 4346 Fax: +61 (0)2 9750 7852 |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|